Home PLS Debugger Architectures vs UDE® Product Features
Architectures vs UDE® Product Features - Image 1
PLS Debugger

Architectures vs UDE® Product Features

Precision You Can Trust
NABL-Accredited Calibration | Available on Request

UDE® Product Finder: Architectures vs UDE® Product Features helps you match your target MCU/SoC to the right UDE capabilities in minutes. Pick an architecture, see supported debug, trace, flashing, RTOS, and automation features, and choose the best UDE toolchain and UAD hardware for your project..

Request Purchase
  • Detail
  • Special Features
  • Specification

The UDE® Product Finder is your quick guide to confirm whether a device family is supported and what you can do on it. Start from the silicon vendor and core architecture, then drill into supported debug transports, trace protocols, and programming paths. You can verify if your target can use on-chip trace, Aurora serial trace, or external trace memory, and whether features like Profiling, Code Coverage, RTOS Awareness, and Python-based test automation are available.
For production and field needs, the finder also points to the right FLASH workflows with UDE® MemTool, including on-chip, on-board, and gang programming options. Teams working on safety programs can confirm coverage and profiling support aligned to ISO 26262. Multi-core projects can check MCDS or CoreSight support and plan complex trace setups with UEC.

  • Architecture-first lookup across Infineon AURIX, NXP S32, Renesas RH850, ST Stellar and STM32, TI Sitara and many more

  • Instant visibility of available debug, trace, FLASH programming, RTOS, and test automation options

  • Clear mapping to UDE features like Code Coverage, Profiling, UEC trace setup, and SimplyTrace®

  • Highlights high-speed access paths such as DAP up to 160 MHz, CoreSight, ETM, Nexus, Aurora and SGBT

  • Shows compatibility with UAD2pro, UAD2next, UAD3+ and communication options like ASC, CAN, JTAG, SWD

  • Includes safety, automotive, and production needs like ISO 26262 coverage flows and Gang Programming

  • Product Name: UDE® Product Finder: Architectures vs UDE® Product Features

  • Primary Use: Map MCU/SoC architectures to supported UDE debug, trace, flashing, RTOS, and automation features

  • Representative Architectures Covered:

    • Infineon: AURIX TC4x, TC3xx, TC2xx, TriCore AUDO, TRAVEO T2G, PSoC4, MOTIX TLE988x/TLE989x, XMC7000/4000/1000, XC2000, XE166, XC166, C166 family

    • NXP: S32G A53, S32Z/E R52, S32S R52, S32K1/K3 M-series, S32V, i.MX RT, KW45 M33, Power Architecture MPC56xx/MPC57xx, S32R

    • Renesas: RH850 G3K/G3M/G4M, RA4/RA6 M33, SuperH SH-2A

    • STMicroelectronics: Stellar R52/M7, STM32 Cortex-M, Power Architecture SPC56x/57x/58x

    • Texas Instruments: Sitara AM64x A53, AM24x R5F, AM263Px R5F, Jacinto 7 A72, MSPM0, TMS570 R4

    • Others: Synopsys ARC, SiFive RISC-V, Xilinx Zynq-7000 A9, Arm7/9/11, Marvell/Intel XScale, AMCC PowerPC 440/460

  • Key Debug Interfaces: JTAG, cJTAG, SWD, MiniJTAG, ETKS, DAP/DAP2 up to 160 MHz, EmbeddedICE, OnCE, COP

  • Trace & Analysis: CoreSight ETM/ETB/TMC, ETM, PTM, FTM, Nexus (incl. Class 3, SPU), MCDS/miniMCDS, Aurora Gigabit Trace, Serial Gigabit Trace, ITM, SWV, SimplyTrace®, IP Snooping

  • Programming & Production: In-system FLASH/OTP with UDE® MemTool, CAN Loader/Recorder, Gang Programming, CANopen Message Formatter

  • RTOS & Platforms: AUTOSAR Classic / OSEK, AUTOSAR ARTI, PXROS-HR, FreeRTOS, SAFERTOS, Keil RTX, µC/OS-II, and others

  • Safety & Metrics: Code Coverage according to ISO 26262, Profiling, Performance counters, Camera/ADC CIF video trace where available

  • Peripherals & Modules: GTM debugger and trace, HSM support, XCP, eTPU/dual-eTPU, TTF triggers

  • Tooling & Automation: UEC for trace configuration, Eclipse plug-in, Python and other scripting, Monitor Development Kit for ASC and CAN

  • UAD Hardware Compatibility: UAD2pro, UAD2next, UAD3+ including long-reach extenders and isolation options