Precision You Can Trust
NABL-Accredited Calibration | Available on Request
High-quality one-channel function/arbitrary waveform generator with 70 MHz bandwidth, 1 GSa/s, and 128 Mpts memory. 3 years warranty.
✨ Why It Helps (Cause → Effect)
High-quality sine to 70 MHz → RF-adjacent tests stay honest → less guesswork.
1 GSa/s + deep memory → sharp edges + long bursts → complex stimuli in one run.
Intuitive GUI → find, set, run → faster setups, fewer missteps.
Wide modulation options → real-world signal behavior → better device validation.
🎛️ Signal Generation (Action → Result)
Pick waveform → set amplitude/frequency/phase → get stable output fast.
Load arbitrary shape → play from memory → mimic sensors, buses, and faults.
Add modulation/burst/sweep → stress the DUT → reveal margin and drift.
🔌 Connectivity (Plug → Automate)
USB-Host / USB-Device / RS-232 / LAN / GPIB → script with SCPI → log, repeat, and scale across benches.
🧪 Where It Fits (Use → Payoff)
Filter and amplifier tests → sweeps show passbands → tuning gets quick.
MCU/FPGA bring-up → clocks, pulses, serial-like patterns → faster debug.
Production fixtures → stored setups → consistent, defensible results.
🎙️ AM Modulation
Change amplitude with a message → volume rises and falls → receivers hear your info clearly.
⏱️ PWM Modulation
Vary pulse width → control average power → motors dim/brighten, drivers respond smoothly.
🔁 FSK Modulation
Flip between two frequencies → 0/1 bits ride as tones → robust digital comms over noisy lines.
🧠 IQ Modulation
Blend I (in-phase) + Q (quadrature) → shape any constellation → clean, spectrum-efficient signals.
🗺️ IQ Mapping Editor & Selection
Draw your own symbol map → pick 16-QAM, 64-QAM, or custom points → test real radios with real constellations.
💥 Burst Function
Gate the waveform on/off → short packets on demand → mimic time-slotted systems and save power.
📈 Sweep Function
Slide frequency/power/phase across a range → reveal resonances and filters → find sweet spots fast.
🏃 Frequency Hopping (Software Option)
Jump between channels quickly → dodge interference → improve link reliability in crowded bands.
Model: DG5071
Channels: 1
Signal Output: Sine, Rectangle, Pulse, Ramp, 9 predefined arbitrary waveforms, freely definable arbitrary waveforms, Noise
Vertical Resolution: 14-bit
Amplitudes: 5 mVpp ~ 10 Vpp (50 Ω)
DC Offset: ±5 V (50 Ω)
Sample Rate: 1 GSa/s
Frequency Range:
Sine: 1 µHz – 70 MHz
Rectangle: 1 µHz – 70 MHz
Pulse: 1 µHz – 50 MHz
Ramp: 1 µHz – 3 MHz
Arbitrary: 1 µHz – 50 MHz
Noise: 100 MHz (-3db)
Resolution: 1 µHz
Display: 4.3″ TFT LCD with 16M true color (480 × 272 pixels)
Interfaces:
USB-Host (for USB stick to save/load waveforms)
USB for PC connection
LAN
GPIB (IEEE-488)
Dimensions (W × H × D): 263 mm × 107 mm × 505 mm (10.35″ × 4.21″ × 19.88″)
Weight: 4.3 kg (9.48 lbs)
Supported Operating Systems: Windows XP (32/64-bit), Vista (32/64-bit), Windows 7 (32/64-bit)