Home ANRITSU | Mobile Wireless Communications Measuring Instruments Wireless Connectivity Test Set (WLAN Tester) MT8862A
Image 1
Image 2
Image 3
ANRITSU | Mobile Wireless Communications Measuring Instruments

Wireless Connectivity Test Set (WLAN Tester) MT8862A

The MT8862A Wireless Connectivity Test Set is a high-performance WLAN tester designed for evaluating RF transmission and reception characteristics of Wi-Fi devices supporting IEEE 802.11a/b/g/n/ac/ax/be standards (Wi-Fi 4 to Wi-Fi 7). It enables accurate, real-world testing using Network Mode and Direct Mode without disabling the DUT's firmware, making it ideal for both R&D validation and production QA. With support for encrypted signal testing, 2x2 MIMO, per-data-rate control, and easy browser-based GUI operation, the MT8862A delivers reliable and efficient WLAN performance analysis across 2.4 GHz, 5 GHz, and 6 GHz bands..

  • Detail
  • Special Features
  • Specification

The MT8862A WLAN Tester offers unparalleled WLAN RF testing capabilities across legacy and next-gen Wi-Fi standards, including Wi-Fi 7 (802.11be). It allows TRx testing in real firmware-driven conditions through Network Mode, which emulates Access Point (AP) or Station (STA) roles for more realistic measurements without test mode restrictions.

The tester supports encrypted transmission measurements, ensuring that the security settings of the DUT remain intact during evaluation. Through its unique data rate control and ACK-based Rx sensitivity algorithms, the MT8862A facilitates granular, automated, and protocol-compliant testing.

Operators benefit from a zero-setup web-based GUI, eliminating versioning issues, and making the MT8862A exceptionally easy to integrate into existing test benches. Features like frame capture logging, bathtub curve generation, and Ethernet-based IP validation make it an end-to-end solution for robust WLAN performance analysis in both design validation and production lines.

  1. Supports IEEE 802.11a/b/g/n/ac/ax/be across 2.4 GHz, 5 GHz, and 6 GHz bands.

  2. Network Mode Testing: Measures Tx power, EVM, etc., under realistic conditions without disabling firmware.

  3. Direct Mode Available for controlled, flexible test environments.

  4. 2x2 MIMO Support: Dual-unit setup for accurate Tx and Rx testing.

  5. Secure Protocol Testing: WEP, WPA/WPA2/WPA3-Personal supported for encrypted DUT evaluation.

  6. Wi-Fi 7 Ready: Per-data-rate evaluation ensures coverage across all Wi-Fi generations.

  7. Built-in Data Rate Control Algorithm: Ensures Tx tests at user-defined data rates.

  8. ACK-based Rx Sensitivity Testing: Automatic bathtub curve generation from -120 dBm.

  9. Web GUI Interface: Operate via browser without software installation.

  10. Frame Capture Logging: *.pcap format for deep packet analysis and troubleshooting.

  11. Ethernet-Based IP Testing: Check IP connectivity via ping and data transfer verification.

Feature Details
Supported Standards IEEE 802.11a/b/g/n/ac/ax/be (Wi-Fi 4–7)
Frequency Bands 2.4 GHz, 5 GHz, 6 GHz
Modes Network Mode (AP/STA emulation), Direct Mode
MIMO Capability 2x2 MIMO Tx and Rx testing (requires two MT8862A units)
Security Protocols WEP, WPA-Personal, WPA2-Personal, WPA3-Personal
Data Rate Control Manual per-data-rate control for Tx tests
Rx Sensitivity Testing Bathtub curve generation via ACK frame count (-120 to 0 dBm range)
User Interface Web browser GUI via Ethernet (no software required)
Remote Control DHCP Client, host/domain name compatible
Logging & Debugging *.pcap frame logging for Wireshark or other analyzers
Connectivity Verification IP data transfer testing via Ethernet (Ping, Data Exchange)
Use Cases WLAN chipset/module testing, final product QA, R&D, OTA test beds