Home IT6300 Tripple Output DC power supply IT6333C
Image 1
Image 2
Image 3
IT6300 Tripple Output DC power supply

IT6333C

Rs. 117157.50

The ITECH IT6333C is a powerful triple-channel programmable DC power supply with a total output of 390 W. It features two high-voltage channels (150 V/1 A each) and one low-voltage channel (30 V/3 A), all isolated. Configurable for series, parallel, or tracking operation, it's ideal for versatile test setups in engineering, manufacturing, and automated systems..

  • Detail
  • Special Features
  • Specification

Part of the IT6300 series, the IT6333C offers multi-output flexibility for complex testing scenarios. Its two high-voltage channels can be used in series for up to 300 V or paralleled for increased current, while the low-voltage channel offers precise support for logic-level supplies. High-resolution controls and rapid sampling enable accurate delivery and monitoring even during dynamic load changes.

Engineers can automate sequences with programmable list mode and set test durations using the built-in timer. Remote sensing compensates for line losses, ensuring voltage accuracy at the device under test. Standard communication interfaces and support for SCPI/VISA protocols facilitate integration with both new and legacy automated test environments. The unit’s intelligent cooling and broad protection suite enhance reliability and operational safety.

  • Three fully isolated outputs

  • Series, parallel, or master/slave tracking modes

  • High resolution: 0.1 mV / 0.01 mA

  • Built-in 5½-digit meters on all channels

  • Fast sampling rate: up to 50 kHz

  • Programmable list and timer functions (up to 99,999.9 s)

  • Remote sensing for accurate voltage delivery

  • Output modes: CV, CC, CR, CW, CZ

  • Over-voltage, over-current, over-temperature, and overpower protection

  • Interfaces: USB, RS‑232, GPIB

  • SCPI and VISA command protocol support

  • Compact and quiet ½‑2U chassis with intelligent cooling

Parameter Value
Model IT6333C
Channels 3 (2×150 V/1 A, 1×30 V/3 A)
Total Power Output 390 W
Voltage Range (CH1/CH2) 0 – 150 V
Current Range (CH1/CH2) 0 – 1 A
Voltage Range (CH3) 0 – 30 V
Current Range (CH3) 0 – 3 A
Resolution 0.1 mV / 0.01 mA
Voltage Accuracy ≤ 0.03% + 10 mV
Current Accuracy ≤ 0.1% + 5 mA
Load Regulation (Voltage) ≤ 0.01% + 3 mV
Load Regulation (Current) ≤ 0.1% + 3 mA
Ripple (Voltage) < 1 mVrms (< 3 mVp‑p)
Temperature Coefficient Voltage ≤ 0.03% + 10 mV • Current ≤ 0.1% + 5 mA
Remote Sensing Yes (all channels)
List Mode Up to 99,999.9 s
Memory 36 programmable setting groups
Output Modes CV, CC, CR, CW, CZ
Interfaces USB, RS‑232, GPIB
Protocols SCPI / VISA
Display Type VFD
Cooling Method Intelligent low-noise fan
Dimensions (W×H×D) 214.5 × 88.2 × 451.6 mm
Weight Approx. 15 kg