Home DC Power Rigol DP813A
Image 1
Image 2
DC Power

Rigol DP813A

Rs. 86490.00

The Rigol DP813A is a high-quality programmable DC power supply with one output channel, offering two selectable voltage ranges: 0-8V/0-20A and 0-20V/0-10A, with a maximum power output of 200 W. It features advanced connectivity options like USB Host, USB Device, LAN, RS232, and Digital I/O interfaces, along with a 3.5″ color TFT display for easy monitoring. This device is backed by a 3-year warranty..

  • Detail
  • Special Features
  • Specification

✨ Why It Helps (Cause → Effect)

  • Live signal curves → see spikes and sags → set limits with confidence.

  • Programmable timer (up to 100 steps) → auto V/I sequences → repetitive tests run hands-free.

  • Output monitoring → hit your condition → warn / beep / shut off → protect the DUT instantly.

  • Output analysis → median/mode/average/variance/deviation → prove stability with data.

  • Trigger I/O → sync with scopes/loads/fixtures → tighter timing, cleaner experiments.

🌐 Remote & Integration (Plug → Perform)

  • USB Host/Device, LAN, RS-232, Digital I/O → SCPI from your PC → script, log, and standardize runs.

  • LabVIEW friendly → drop into automated test setups (ATE) → higher throughput, fewer manual steps.

🧪 Typical Uses (Task → Outcome)

  • Board bring-up → soft ramps, strict limits → fewer fried parts.

  • Battery/charger cycles → timed profiles → reliable, repeatable data.

  • Production checks → saved sequences → dependable pass/fail gates.

 

📺 Clearly Arranged Display
3.5″ TFT, 320×240 → volts/amps/watts/limits stay clear → faster checks, fewer mistakes.

🧭 Output Monitoring
Track output state → meet your condition → warn / beep / shut off → protect the DUT instantly.

📈 Display Signal Curves
Live traces → see spikes and dips while adjusting limits → set safer thresholds with confidence.

⏱️ Programmable Timer
Store up to 100 steps → auto V/I changes at set intervals → repetitive tests run hands-free and repeatable.

📊 Output Analysis
Review recordings → groups, median, mode, average, deviations → prove stability with hard numbers.

🔗 Trigger I/O
Rear digital I/O → trigger in/out → sync with scopes, loads, and fixtures → tighter timing, cleaner experiments.

🌐 Excellent Connectivity & Remote Control
USB, LAN, GPIB → SCPI or LabVIEW → send commands, log data, integrate into ATE with ease.

Specification Rigol DP813A
Channels 1
Power 200W
Voltage Range (Range 1) 0-8V
Voltage Range (Range 2) 0-20V
Current Range (Range 1) 0-20A
Current Range (Range 2) 0-10A
Resolution (Voltage) 1 mV
Resolution (Current) 1 mA
Connectivity USB Host/Device, LAN, RS232, Digital I/O
Display 3.5″ TFT
Dimensions (W × H × D) 239 x 157 x 418 mm
Weight 10.5 kg