Home DC Power Rigol DP932A
Image 1
Image 2
Image 3
DC Power

Rigol DP932A

Rs. 99474.00

The Rigol DP932A is a high-quality programmable DC power supply with three isolated independent output channels: 0-32 V / 3 A (CH1), 0-32 V / 3 A (CH2), and 0-6 V / 3 A (CH3), with a maximum power output of 210 W. It features internal series/parallel connections for CH1 and CH2, a 4.3″ LCD color touch screen, and front-panel safety sockets. The power supply includes an NABL Calibration Certificate and a 3-year warranty..

  • Detail
  • Special Features
  • Specification

⚙️ Control & Clarity (Cause → Effect)
Tight voltage/current setpoints → safer bring-ups → fewer fried parts.
Touch UI → tap, adjust, confirm → faster, cleaner workflows.
On-screen curves → spikes and sags visible → issues spotted early.

🛡️ Safe Connections (Action → Result)
Front-panel safety sockets → firm grip, correct polarity → protect probes and DUTs.
Isolated channels → no cross-talk → mixed circuits stay stable.

➕ Flexible Pairing (CH1 & CH2)
Series inside → higher voltage from two → run bigger stacks neatly.
Parallel inside → higher current from two → feed hungry loads cleanly.
Internal routing → no jumpers → a tidier, safer bench.

🌐 Remote & Integration (Trigger → Outcome)
SCPI over USB/LAN + Digital I/O → script tests, log data → repeatable results at scale.
Slots into ATE racks → manual or automated → same supply, same steps.

🔬 Where It Fits (Task → Payoff)
Board bring-up → soft ramps → protect new silicon.
Regulator/battery emulation → step loads → validate response.
Industrial fixtures → consistent profiles → reliable pass/fail gates.

✅ Bottom Line
Need three clean outputs, touch-simple control, and easy automation?
Pick DP932A → wire once, tap to run, watch curves tell the truth.

📌 Short Description
RIGOL DP932A → 4.3″ color touch → clear volts/amps/watts at a glance; live curves show spikes and sags in real time.

⚙️ Large Color Touch Screen
Tap, read, adjust → fewer steps, fewer mistakes.
320×240 display → values stay big and clear → quick checks under pressure.

🧲 Isolated, Independent Channels (3x)
Each output isolated → safer mixed tests → no surprise cross-talk.
Set volts/amps per channel → one supply, many jobs.

➕ CH1 & CH2: Series / Parallel Inside
Series link → higher voltage from two → run bigger stacks neatly.
Parallel link → higher current from two → feed hungry loads cleanly.
All internal → no jumper clutter → tidier, safer bench.

🛡️ Front-Panel Safety Sockets
Secure jacks → firm grip, fewer slips → protect probes and DUTs.
Color cues on ports → faster, correct hookups.

⏱️ Programmable Timer (Up To 100 Steps)
Schedule V/I changes → hands-free profiles → perfect for burn-in and stress tests.
Repeat saved steps → consistent results → easy A/B comparisons.

📈 Display Signal Curves (Live)
See voltage, current, power traces → spot inrush peaks and droops.
Tune limits with confidence → catch issues before parts cook.

🌐 Remote Control: SCPI / LabVIEW
USB, LAN, Digital I/O → script tests from your PC.
SCPI commands → quick automation → clean logs for reports.
LabVIEW friendly → drop into existing rigs without fuss.

🧪 Everyday Uses (Task → Outcome)
Board bring-up → soft ramp → protect new silicon.
Battery/rail emulation → step loads → validate regulators.
IoT and motors → capture wake peaks → set safe current limits.

✅ Bottom Line
Need three safe outputs, touch-simple control, and easy automation?
Pick DP932A → wire once, tap to run, watch curves tell the truth.

Specification Rigol DP932A
Outputs 3
Output 1 0 to +32 V / DC with max. 3 A
Output 2 0 to +32 V / DC with max. 3 A
Output 3 0 to +6 V / DC with max. 3 A
Ground Sharing Output 1 sole GND, Output 2 + Output 3 shared GND
Output Power (max.) 210 W
Overtemperature shutdown 55 °C
Working Temperature 0 °C to 40 °C
Cooling Method Fan cooling
Output Voltage Output 1: 0 to +32 V, Output 2: 0 to +32 V, Output 3: 0 to +6 V
Accuracy (Voltage) ±0.1% + 20 mV
Resolution (Voltage) 1 mV
Overvoltage Protection 1 mV to 33 V
Load Regulation (Voltage) < 0.01% + 2 mV
Line Regulation (Voltage) < 0.01% + 2 mV
Ripple and Noise (Voltage) < 350 μV rms / 2 mVpp
Output Current Output 1: 3 A, Output 2: 3 A, Output 3: 3 A
Accuracy (Current) ±0.2% + 10 mA
Resolution (Current) 1 mA
Overcurrent Protection 0.1 mA to 5.5 A (Output 1), 0.1 mA to 2.2 A (Output 2), 0.1 mA to 2.2 A (Output 3)
Load Regulation (Current) < 0.01% + 250 μA
Line Regulation (Current) < 0.01% + 250 μA
Ripple and Noise (Current) < 2 mA rms
Display 4.3″ LCD Color Touch Screen
Resolution (Display) 320 × 240 Pixel
Additional Interfaces USB Host, USB Device, LAN, Digital I/O (optional)
Dimensions (W × H × D) 23.9 cm × 15.7 cm × 41.8 cm
Weight 9.0 kg
Input 230 V/AC, 115 V/AC, or 100 V/AC (adjustable)
Tracking Function Yes (for Output 1 and Output 2)