Home ONOSOKKI AP-981 Acid resistant, Waterproof Electromagnetic Detector
Image 1
Image 2
ONOSOKKI

AP-981 Acid resistant, Waterproof Electromagnetic Detector

Precision You Can Trust
NABL-Accreditied Calibration | Available on Request

The AP-981 is an acid-resistant, waterproof magneto-electric rotation detector designed for non-contact RPM measurement across a wide speed range—from nearly zero to high-speed rotation. It comes with a pre-attached durable cable for dependable performance in harsh industrial environments..

  • Detail
  • Special Features
  • Specification

The AP-981 leverages a magneto-electric design comprising a magnetic-resistive sensor, permanent magnet, and DC amplifier plus voltage regulation. It transforms magnetic flux changes—generated by gear tooth rotations—into clean square-wave signals. This makes it effective for capturing engine speed seamlessly, even in harsh conditions like chemical exposure.

With its integrated signal cable, it’s designed for quick and reliable connection to tachometer systems without additional wiring. The non-contact nature eliminates wear and enhances safety. Plus, its IPX7-rated protection ensures consistent operation even when exposed to moisture or corrosive vapors.

  • Non-Contact Gear Detection – Measures rotational motion by detecting magnetic flux from gear teeth without physical contact.

  • Ultra Wide Speed Range – Operates accurately from virtually 0 r/min up to 20,000 r/min when using a 60-tooth gear.

  • Certified Durability – Built to be acid-resistant and waterproof, suitable for corrosive or wet environments.

  • Rigid & Lightweight Build – Compact size ensures easy installation and mounting in tight spaces.

  • Extended Cable Included – Features a 1.9-meter acid-resistant cable integrated into the detector for flexibility in setup.

Specification Details
Detection Principle Magneto-electric (magnetic-resistive) sensing of gear tooth flux
Speed Range ~0 to 20,000 r/min (with 60 P/R gear)
Durability Rating Waterproof and acid-resistant (JIS C0920 compliant)
Cable Length 1.9 meters (acid-resistant)
Output Signal Type Square wave; High: ~5 V, Low: ≤ 0.5 V
Output Impedance Approx. 330 Ω
Power Supply 12 V ±2 V DC
Power Consumption ~30 mA at 12 V (approx. 40 mA for non-waterproof types)
Gear Requirements Module: 1 to 3; Tooth width at least 3 mm
Operating Temperature –10 to +70 °C (–10 to +50 °C with 10% nitric acid mist)
Shock Resistance 490 m/s² (unpowered) across X, Y, Z axes
Vibration Resistance 1.2 mm amplitude at 30 Hz (powered)
Body Material Polycarbonate
Weight Approx. 130 g (with signal cable)