Product added to cart successfully
Home DC Power Rigol DP822
Rigol DP822 - Image 1
Rigol DP822 - Image 2
DC Power

Rigol DP822

In Stock

Precision You Can Trust
NABL-Accredited Calibration | Available on Request
Rs. 92748.00 (Excl. GST)

The Rigol DP822 is a high-quality programmable DC power supply with two output channels. Channel 1 provides a voltage range of 0-20V and a current range of 0-5A, while Channel 2 offers 0-5V and 0-16A, with a maximum power output of 180W. It features USB Host/Device interfaces and comes with a 3.5″ TFT display for easy monitoring of voltage, current, and power measurements. With the purchase of a new DP800 Series power supply, the HIRES-DP800 module (1mV/1mA High Resolution) is preinstalled, valid until 31.12.2025. The device includes a 3-year warranty..

Quantity:
- +
  • Detail
  • Special Features
  • Specification

✨ Key Benefits (Cause → Effect)
Independent outputs → separate specs per load → one box, fewer swaps.
Live signal curves → spikes and sags visible → limits set with confidence.
Output monitoring → hit condition → warn / beep / shut off → protect the DUT.

🖥️ Control & Visibility
320×240 screen → clean numbers, steady graphs → faster checks, fewer mistakes.
Tight setpoints → safer bring-ups → truer measurements.

⏱️ Automation (Steps → Results)
Programmable timer (up to 100 steps) → auto V/I sequences → repetitive tests run hands-free.
Store & recall profiles → consistent data → easy comparisons.

📊 Analysis (Data → Decisions)
Built-in stats → median, mode, average, variance, deviations → verify stability with proof.
Review recordings → spot drift early → fix before failures.

🌐 Connectivity & Remote Control
USB Host/Device → SCPI commands → script, log, integrate smoothly.
LabVIEW friendly → drop into ATE rigs → higher throughput, less manual work.

🧪 Where It Fits (Use → Payoff)
Two-rail boards → matched supplies → cleaner bring-ups.
Sensors and MCUs → ramp tests, step loads → fewer fried parts.
Production checks → saved sequences → dependable pass/fail gates.

📺 Clearly Arranged Display
3.5″ TFT, 320×240 → volts/amps/watts/limits stay clear → faster checks, fewer mistakes.

🧭 Output Monitoring
Watch output state → hit your condition → warn / beep / shut off → protect the DUT instantly.

📈 Display Signal Curves
Live traces → see spikes and dips while you tweak current limits → set safer thresholds with confidence.

⏱️ Programmable Timer
Store up to 100 steps → auto V/I changes at set intervals → repetitive tests run hands-free and repeatable.

📊 Output Analysis
Review recorded files → median, mode, average, deviations, group counts → prove stability with hard numbers.

🔗 Trigger Output
Rear digital I/O → trigger in/out → sync with scopes, loads, and fixtures → tighter timing, cleaner experiments.

🌐 Remote Control (SCPI / LabVIEW)
USB, LAN, GPIB → send commands, log data, automate workflows → drop into ATE rigs without fuss.

Specification Rigol DP822
Channels 2
Power 180W
Voltage Range (CH1) 0-20V
Voltage Range (CH2) 0-5V
Current Range (CH1) 0-5A
Current Range (CH2) 0-16A
Resolution (Voltage) 10 mV
Resolution (Current) 10 mA
Connectivity USB Host/Device
Display 3.5″ TFT
Dimensions (W × H × D) 239 x 157 x 418 mm
Weight 10.5 kg
Accessories Power cord, USB cable, Spare fuses, Short circuit equipment